Welding Fixtures & Tooling
Welding Table Locating Bar
Welding Table Locating Bar Manufacturer ,Designed for workpiece positioning and angle alignment, with customization options from Juniq Precision.
Features
- Accurate Positioning
- Angle Alignment
- Flat Locating Design
- D28 System Compatibility
Applications
D28 Welding Table Locating Bar | Juniq Precision
Reliable Industrial Solutions for Metal Work and Industrial Applications
ⓘ Important Notice: Due to the wide range of specifications available, not all options can be listed here. Please contact our sales engineers for the complete specification sheet and corresponding quotation.
Welding Table Fixtures for D28 System
The D28 Welding Table Locating Bar is a practical positioning accessory designed for D28 3D welding tables and modular welding fixture systems. It helps welders and fabrication professionals position workpieces, establish reference angles, and maintain consistent alignment during welding and assembly.
As an essential D28 welding table locating tool, this flat locating angle ruler supports flexible fixture setup for metal fabrication, structural welding, and precision assembly. It can be used with compatible welding table fixtures to improve positioning efficiency and reduce repeated manual adjustments.
Looking for a reliable flat locating angle ruler for your D28 welding table? JUNIQ Precision can help you find suitable welding fixture accessories for your application, with customization options available according to your project requirements.
Contact Us for Price Now↓↓↓
Email: info@juniqprecision.com
WhatsApp: +86 151 5226 0167
Website: www.juniqprecision.com
Wuxi Juniq Precision Industrial Co., Ltd.
Key Features of Welding Table Positioning Bar
Accurate Workpiece Positioning
The D28 welding table flat locating angle ruler provides a reference surface for positioning workpieces during welding preparation. It helps operators establish repeatable positioning points and maintain consistent alignment throughout fixture setup.
Designed for D28 Welding Table Systems
This D28 flat locating angle ruler is intended for compatible D28 modular welding tables and fixture systems. Confirm the hole system, dimensions, and mounting compatibility before ordering.
Flexible Angle Location
The flat locating angle ruler can assist with setting workpiece positions and reference angles for different fabrication tasks. It is useful when preparing components for tack welding, final welding, and assembly.
Supports Repeatable Fixture Setup
Using a D28 welding table locating ruler helps reduce repeated measuring and repositioning. This can make routine welding preparation more efficient, especially when producing multiple similar parts.
Suitable for Modular Welding Fixtures
The D28 flat locating angle ruler can be incorporated into a modular welding fixture arrangement alongside compatible positioning blocks, clamps, locking pins, and other welding table accessories.
Why Choose Our Locating Bar for Welding Work?
Improve Workpiece Alignment
| 1.Reference positioning | Helps establish consistent workpiece locations |
| 2.Modular compatibility | Supports flexible fixture arrangements on compatible D28 systems |
Support Repeatable Production
| 1.Flexible applications | Suitable for different metal fabrication and welding tasks |
| 2.Practical fixture integration | Works alongside compatible welding table clamps and positioning accessories |
Need to improve your welding fixture setup? Choosing the right D28 welding table positioning accessories can help streamline preparation, simplify repeat jobs, and support a more organized welding workflow.
JUNIQ Precision D28 Flat Locating Ruler
Technical drawing and dimensions for Locating Angle Ruler used in 3D welding table positioning and clamping applications.
Technical Drawing
Reference diagram · Dimensions in mm
Product Dimensions
D28 Flat Locating Angle Ruler · Dimensional reference
| Item | Specification | Material |
|---|---|---|
 |
100x50x25mm | Q355 steel |
 |
150x50x25mm | Q355 steel |
 |
225x50x25mm | Q355 steel |
 |
300x50x25mm | Q355 steel |
 |
500x75x25mm | Q355 steel |
|
800x75x25mm | Q355 steel |
 |
1000x100x25mm | Q355 steel |
Note: Final dimensions, material, surface treatment, mounting details, and compatibility should be confirmed against the actual product drawing before ordering.
How to Use the D28 Locating Bar?
Usage Instructions：
Step 1: Check Compatibility
Confirm that the D28 welding table flat locating angle ruler matches your welding table's hole system, mounting method, and fixture configuration.
Step 2: Clean the Contact Surfaces
Remove welding spatter, dust, and metal debris from the table and locating surfaces to support proper installation and positioning.
Step 3: Install the Locating Accessory
Position the D28 flat locating angle ruler at the required reference point and secure it using the compatible mounting method specified for the product.
Step 4: Position the Workpiece
Place the workpiece against the locating reference and check its alignment against the fabrication drawing or required dimensions.
Step 5: Secure and Verify
Use compatible clamps or other suitable fixtures to secure the workpiece. Check the position and angle before tack welding or proceeding with the next fabrication step.
Step 6: Complete the Welding Operation
After confirming the setup, continue with the required welding and assembly process. Recheck positioning as needed for critical dimensions.
Video Showcase
For more videos ,please kindly feel free to contact our sales engineer:Summer directly.
D28 Flat Positioning Bar
Need better positioning for your welding projects?
Our D28 Flat Angle Ruler for 3D Welding Tables helps align workpieces and build flexible welding fixtures.
Custom sizes and configurations are welcome. Send us your requirements for a quote!
Where D28 Positioning Bar Are Used？
Metal Fabrication
The D28 welding table flat locating angle ruler helps position metal components before welding. It is suitable for workshops handling brackets, frames, plates, and other fabricated metal parts.
Structural Steel Welding
For structural steel fabrication, the D28 flat locating angle ruler can provide a positioning reference when arranging compatible components on a modular welding table.
Welding Fixture Assembly
The D28 welding table locating angle ruler can be used as part of a fixture setup that combines positioning blocks, clamps, and other modular accessories to hold components in the required arrangement.
Automotive Component Fabrication
In automotive component workshops, a D28 welding table positioning accessory can support repeatable setup for metal brackets, support structures, and other welded assemblies.
Other Products of JUNIQ pRECISION
Tailored Welding Fixtures Solutions
We provide customized welding fixtures and clamps for metal fabrication applications.
Send us your machine specifications, belt dimensions, workpiece material, or product drawings to discuss a suitable abrasive belt solution.
Customization Options
- ✓Height,Width and length
- ✓Size
- ✓Material
- ✓LOGO
- ✓Packaging
OEM / ODM Services
- ✓ Private label and branding
- ✓ Custom packaging design
- ✓ Performance formulation adjustments
- ✓ Sample and trial order support
- ✓ Competitive MOQ negotiation
How are Our Welding Locating Bar Shipped?
Inquiry & Specification
Contact our sales team with your required specifications including size, material and quantity. We will provide a detailed quotation within 24 hours.
Packaging
Standard industrial packaging ensures safe transit. Custom packaging and labeling available for OEM customers. Bulk orders shipped on pallets with protective wrapping.
Delivery & Lead Time
Standard production lead times range from 7–15 days depending on order quantity and specifications. Express shipping options available for urgent requirements.
Why Choose JUNIQ Precision?
D28 Flat Locating Angle Ruler
Reliable Welding Solutions from a Trusted Manufacturer
✓Required quantity
✓Product dimensions or drawing
✓Welding table model or hole system
✓Application requirements
✓Destination country
JUNIQ Precision provides industrial product sourcing and customization support for welding fixtures, abrasive tools, sealing products, pump components, and hardware accessories.
When sourcing a D28 Welding Table Locating Bar, our team can help you clarify product specifications, check compatibility requirements, and discuss suitable options for your workshop or production project.
Send us your enquiry with:
Contact JUNIQ Precision today for product details and a quotation.
Get a Quote Now
JUNIQ Precision — Practical Industrial Sourcing and Customized Solutions for Your Welding Fixture Needs.
FAQ
Frequently Asked Questions
Need a Suitable Solution?
Send us your requirements and our engineers will recommend the right product for your needs.
